Wet N Gone Water Soluble Stabilizer by Floriani (FWG)

Floriani Wet N Gone
Water Soluble Stabilizer

This unique product is a fibrous water soluble stabilizer and does a superior job of supporting dense embroidery designs. Embroider most free standing lace with just one layer! Its clean rinse capability makes it the best choice when using it with delicate fibers such as yarn scarves or English netting. It is now available in a fusible as well as a sticky version. 

*Use the fusible version on sheer fabrics such as organdy, organza, lame, sheer silks and more to establish a solid type fabric that is easier to hoop and embroider. Once the embroidery is complete, all the stabilizer rinses away and will not shadow through. 

*Use the sticky version of Wet N Gone® to embroider delicate designs on hard to hoop items such as the corners of handkerchiefs, silk blouse collars and more.

-- Create free standing lace and use just one layer for most designs
-- Perfect for making appliqués, decorative pins and/or 3-D embroidery.
-- Rinses clean leaving no messy residue
-- Use as a topping for wide satin stitch designs on high pile fabrics for perfect results!

To use regular Wet N Gone® for free standing lace and/or embroideries:
1. Hoop one layer of the stabilizer within the embroider frame. Try to achieve "tight
    as a drum" tension without stretching or distorting the stabilizer. 
2. Embroider the design.
3. Remove the product from the hoop and trim away as much of the stabilizer as
4. Rinse away the Wet N Gone® using luke warm water. *Tip - If your desire is to
    have the lace stiff, simply get the embroidery wet. Don't rinse! Once it is
    wet, the stabilizer will be absorbed into the stitching and will dry stiff.

To use Wet N Gone Fusible®:
1. Fuse one layer of the stabilizer on to the back of the fabric. Be sure to use a piece
    at least one inch larger than the outer parameter of the hoop to insure proper
    stabilization. *Important - Use a low temp (260°, silk) setting on your iron. Do not
    touch the surface of your iron to the Wet N Gone Fusible®, use a press cloth
    (muslin or cotton). Press quickly! It is not necessary to hold the iron to the fabric
    for more than three seconds.
2. Repeat steps 2-4 from above.

To use Wet N Gone Tacky®:
1. Place one layer of the product in your embroidery hoop, paper side up.
2. Score the release paper with a pin or needle and peel back. 
3. Stick the garment or item to be embroidered in place and smooth out any wrinkles.
    *Tip - It is necessary to use "soft" water to get optimal rinse results with this product.
4. Repeat steps 2 - 4 from above.

Floriani's Wet N Gone® Product Identity
FWG1210 12" X 10 yds 1.2oz
FWG1510 15" X 10 yds 1.2oz
FWG2010 20" X 10 yds 1.2oz












Download the Floriani Stabilizer Brochure HERE (Right-Click "Save Target/File/Link As")
Download the Floriani Stabilizer Workbook HERE (Right-Click "Save Target/File/Link As")
Return to our top level Floriani stabilizer section HERE.
Review our exceptional quality Floriani threads HERE.
Browse all of our brands of stabilizer HERE.

Wet N Gone Water Soluble Stabilizer by Floriani (FWG)

www.SewingSupplyWarehouse.com has been serving your embroidery, sewing, and quilting
needs since 2000. We are an authorized dealer for Brother, Simplicity, and Handi-Quilter.
We offer replacement parts, accessories, and notions for most brands of household machines.
We combine the service of a small company with the robust security backing of the Yahoo! Stores.
ecommerce provided by Yahoo! Small Business